Trial and Error

# High Dimensionality Pseudo Random Number Generators

Here I attempt to show:

• A simple one-dimension pseudo-random number generator (PRNG)
• How to extend this generator to higher dimensions
• How to make this generator more efficient
• How this technique can be used to find very long binary maximum length sequence generators

## A Simple One Dimensional PRNG

With the recurrence relation:

1.)   x_(i+1) = a*x_i mod p,

where p is a prime number, we can produce quite random looking sequences. For example, with a=3 and p=7, we get the sequence {1, 3, 2, 6, 4, 5}.

We can determine x_i for any i without recursion by unraveling the recursive relation[1] to get

2.)   x_i = a^i*x_0 mod p

where x_0 is the initial starting value.

A sequence that cycles through every possible number is a maximum length sequence, which for our simple one dimensional recurrence relation has a period of p-1. Not every value of a results in a maximum length sequence. In our example only a=3 and a=5 produce maximum length sequences.

We know that the maximum length of a sequence is p-1 and if a sequence does not have maximum length, then p-1 will be divisable by the sequence non-maximum length. To find values of a that produce maximum length sequences, we can generate random values of a and test to see if the sequence repeats for all possible divisors of p-1. For example if p=7, then p-1=6, which has divisors 2 and 3. We only need to examine if a^2 mod 7=1 and a^3 mod 7=1 to test if the sequence repeats.

Property: Non-optimal sequences will have a period length which evenly divides into p-1

Lets take a look at a larger example with p=227. Since p-1=226 is divisible by 2 and 113, we can try random values of a making sure that a^2 mod 227!=1 and a^113 mod 227!=1. We see that a=21 is not optimal because 21^113 mod 227 = 1, however a=20 is optimal because 20^2 mod 227 = 173 and 20^113 mod 227=226, neither of which is 1. Here is a graph of the entire sequence for (20,227).

While this result seems random, we can see the underlying structure by doing a phase plot, which is a plot of the pairs (x_i, x_(i+1)). Figure 2 below shows the results of our (20,227) PRNG.

In this view we can see that the non-random nature of the sequence. There is no chance of most (x_i, x_(i+1)) pairs ever occurring. We could never have two equal values as a pair for instance such as (50, 50). This is due to the lack of memory of our recurrence relation. Each new value depends only the previous value before it. We could never have a pair like (50, 50), unless our entire sequence was nothing but 50 repeated for the entire sequence.

## A Multi-Dimensional PRNG

Extending our simple PRNG into multiply dimensions can be done by considering a to be a matrix (bar A) and bar x_i to be a vector (bar x_i), i.e.

3.)   bar x_i = bar A . bar x_(i-1) mod p

Similar to our simple one dimenion recurrence relation, we can unwrap this equation to be

4.)   bar x_i = bar A^i . bar x_0 mod p

In this case, a maximum length sequence will step through all possible combinations of the vector bar x_i. For a matrix of rank d, there are p^d-1 combinations. For a maximum length sequence, the sequence MUST repeat after p^d-1 vector tuples, which means that for a maximum length sequence bar A^(p^d-1) mod p=bar I

Property: For a matrix of rank d, the maximum length sequence is p^d-1 long and matrix bar A has the property bar A^(p^d-1) mod p=bar I

For example, consider the sequence generated by the matrix bar A = [[2,1],[3,3]], and prime p=7 Starting with bar x_i=[0,1], we get the sequence

(0,1), (1, 3), (5, 5), (1, 2), (4, 2), (3, 4), (3, 0), (6, 2), (0, 3), (3, 2), (1, 1), (3, 6), (5, 6), (2, 5), (2, 0), (4, 6), (0, 2), (2, 6), (3, 3), (2, 4), (1, 4), (6, 1), (6, 0), (5, 4), (0, 6), (6, 4), (2, 2), (6, 5), (3, 5), (4, 3), (4, 0), (1, 5), (0, 4), (4, 5), (6, 6), (4, 1), (2, 1), (5, 2), (5, 0), (3, 1), (0, 5), (5, 1), (4, 4), (5, 3), (6, 3), (1, 6), (1, 0), (2, 3)

Every possible number pair except (0,0) occurs in this sequence. As before, we can test for non-optimal sequences by testing that bar A^x mod p != bar I for all possible x in {divisors of p^d-1}

Property: Non-optimal vector sequences will have a period length which evenly divides into p^d-1. We can test our matrix bar A by making sure that bar A^n mod p != bar I for all possible n in {divisors of p^d-1}.

### Testing for all possible divisors

What does testing all possible divisors mean? I want to emphasize that all divisors means more that just testing all factors. It means testing all factors as well as the unique product of all possible combinations of factors. Consider the number of divisors for a rank 3 matrix and prime p=227. The factors of 227^3-1 are 2, 73, 113, and 709. The possible divisors are then 2, 73, 113, 146, 226, 709, 1418, 8249, 16498, 51757, 80117, 103514, 160234, 5848541. Since combinations of factors grows exponentially, we want to be careful in our selection of matrix rank and prime number combinations, especially if we are working with large primes and matrix ranks. If we choose poorly, then the number of tests required may be prohibitive. If each factor is unique i.e. a number is not a factor more than once, then the number of possible divisors will grow as sum_(i=1)^(n-1) (n!)/(i!(n-i)!). For example, a p^d-1 number with 20 unique factors would require over 1 million tests for every matrix candidate.

Anecdotally, I found that matrices that have a even rank tend to have more factors, so I stick with matrices with a odd rank. Looking at the factors of p^n-1, we can see why this might be

RankLengthSymbolic Factors
2p^2-1(p-1)(1+p)
3p^3-1(p-1)(1+p+p^2)
4p^4-1(p-1)(1+p)(1+p^2)
5p^5-1(p-1)(1+p+p^2+p^3+p^4)
6p^6-1(p-1)(1+p)(1-p+p^2)(1+p+p^2)
7p^7-1(p-1)(1+p+p^2+p^3+p^4+p^5+p^6)
np^n-1(p-1)(1+p+p^2+p^3+p^4+p^5+...+p^n-1)

Even rank matrices automatically have factors built-in. With odd rank matrices we can find very large p^n-1 with only 4 or 5 factors. Theoretically as few as two, but I have never found any with that few.

### Applying to traditional 1 dimensional linear congruential PRNGs

At the start of this article I discussed a 1 dimensional sequence generator of the form

x_(i+1) = a*x_i mod p,

However, this is not the traditional form of simple linear PRNGs used by computer programs, which include an additional constant, i.e.

x_(i+1) = (a*x_i + c) mod p,

This is a 1 dimensional generator and so has a maximum period of p-1.

We can convert this into a matrix form as

bar x_i = [[a,c], [0,1]] . bar x_(i-1) mod p,

with matrix bar A = [[a,c],[0,1]] and starting vector

bar x_0 = [[x_0],[1]]

Now that we have converted the popular linear congruential PRNG into matrix form, we can apply the above techniques to find optimal values of a and c.

It is quite common for computer algorithms to use a non-prime modulus p. I do not know how a maximal length sequence can be guaranteed to be found for non-prime p since we can only insure that bar A^(p-1) = I for prime values of p. It may be that many traditional parameters in use are not optimal. However, if we use a prime value of p, then we can be mathematically certain we have found parameters that produce a maximal length sequence.

### Applying to complex numbers

The recurrence formula for complex number looks the same as for our 1-dimensional case except that x is now a complex number

x_(i+1) = a*x_i mod p

For complex multiplication of c_1 = (a,b) times c_2 = (x,y) we have

c_1 c_2 = (a x, -b y)

This can be replicated as matrix multiplication as

[[a,0],[0,-b]] . [[x],[y]]

If we limit the search for optimal 2-dimensional matrix restricted this form, we can find a complex value a with Mersenne prime p that will have a maximal period p^2-1

I'm not sure if this is useful or not, but it is interesting that finding an optimal linear PRNG for complex numbers can be done and can be done quite easily.

### The 2 dimensional matrix case

When d=2 then the maximum length sequence is p^2-1 which has the factors (p-1)(p+1)

In the special case where p is a Mersenne prime i.e. p = 2^n-1, then the factors are

(2^n-1)^2-1 = 2^n (2^n-2) = 2^(2*n-1), which simplifies to 2 recurring 2n-1 times.

In this case, the only factor is 2 repeated and the unique divisors of p^2-1 are

[2, 2^2, 2^4, ..., 2^(n-2), 2^(n-1)]

This makes testing for optimal matrices fast and easy, as we only need to test n-1 divisors to see if there is repetition and these divisors are known ahead of time. This can still be in the thousands for very large Mersenne primes, however it is not in the millions, which can easily occur otherwise for random primes p and large matrix ranks n

### Optimal sequence finding algorithm

The procedure for finding an optimal matrix A for prime p is:

1. populate matrix A with random values between 0 and p.
2. Test that bar A^(p^d-1) mod p=bar I. If not then go back to step 1.
3. Test that bar A^n mod p!=bar I for all possible n divisors of p^d-1. If not then go back to step 1.

Applying these steps I found this rank 3 matrix for prime 227

bar A = [[125, 192, 139], [223, 27, 176], [198, 181, 157]]

With this small prime we have a practical maximum period of 227^(3-1) = 51529 numbers between 0 and 226

Here is an example graph where I do a phase plot of the first element of vector bar x_i for p=227 for the first 10,000 values.

### Sequence autocorrelation

While an optimal sequence never repeats for p^d-1 elements, it is correlated for every (p^d-1)/(p-1) segments. It repeats as a constant factor mod p every (p^d-1)/(p-1) elements. We can see this if we do an auto-correlation over the entire sequence. For the sequence

bar A = [[4, 6, 1], [6, 0, 2], [3, 6, 0]], and p=7,

there are autocorrelation spikes every (p^d-1)/(p-1)=(7^3-1)/(7-1)=57 elements.

While the sequence does not repeat, this correlation is undesirable and the practical maximum length of our sequence is (p^d-1)/(p-1) elements long. For a large prime p, the effective random sequence length can be approximated as p^(d-1)

Property: For a matrix of rank d, the practical maximum length sequence is (p^d-1)/(p-1) approx p^(d-1) elements long.

### A more efficient version

Ideally we would like use large matrices in order to achieve high randomness 'complexity' and long maximum sequence length, however the number of multiplications necessary to generate a sequence grows as d^2 i.e. complexity is O(n^2). We can do better if we constrain our matrices to be of the form

[[a_1, a_2, a_3, a_4, ..., a_(n-1), a_n], [1,0,0,0,...,0,0], [0,1,0,0,...,0,0],[0,0,1,0,...,0,0], [...,...,...,...,...,...,...], [0,0,0,0,...,1,0]]

In matrix form we can still use the techniques that we used previously to find optimal sequences, however the number of multiplies now only grows as d i.e. complexity is O(n).

Once we have found our coefficients a_i, we can calculate our sequence as the recurrence relation:

x_i=sum_(j=1)^d a_j * x_(i-j)

For example for d=3 and p=7, we find optimal sequence coefficients a=[6,2,5], which gives us a maximum length sequence of 342 elements and a practical sequence length of 57 elements. Plotting the entire sequence we see that it looks nicely random and does not repeat.

### Binary Maximum Length Sequences

As we discovered for maximum length sequences, we need to test all n in {divisors of p^d-1} to make sure bar A^(n) mod p!=bar I. It would be nice if we could find (p,d) combinations so that p^d-1 was prime, then there would not be any divisors and we would then only to test that bar A^(p^d-1) mod p=bar I. Unfortunately it is easily shown that

p^d-1=(p-1)(1+p+...+p^(d-1))

So p^d-1 always has at least two factors unless p=2. If p=2 then we can find 2^d-1 that are prime. These are the so-called Mersenne prime numbers. An advantage of using p=2 is that integer multiplications can be replaced with logic operators. Depending on the system, Mersenne prime PRNG with logic operations (instead of multiplies) may be more efficient way to produce a random sequence. We could produce very long binary sequences similar to how the Mersenne Twister PRNG does.

### Efficiency considerations

Multiplication is often considered to be slow. We can easily transform our PRNG to use bitshifts instead of multiplication by testing for matrices that contain elements that are a power of 2 only. Our recurrence forum can then become

x_i=sum_(j=1)^d x_(i-j)<<n_j

where n_j exponent for the matrix element of the power of a_j=2^(n_j) and << is the bitshift operator.

While this seems like it should be faster than the multiplication version, when I tested this on my PC with Intel i7 chip and there was no difference. There is a lot of dedicated multiplication circuitry on many modern CPUs, so on some architectures it seems there is very little difference in speed.

To obtain maximum speed it seems much more important to minimize use of the modulus operator, which is computational expensive (here I did notice a significant difference in performance). One has to be aware of possible overflow and make sure that all multiplies and additions will fit within the integer size used to calculate the results. Ideally one would like to get rid of the modulus operation altogether by using a value of p that is a power of 2. However p of a power of 2 are not primes and will have a lot of factors (n factors for 2^n). I'm not sure if it's even possible for maximal length sequences to exist with non-prime p, although if one is really concerned about speed, looking into 'long' sequences (if not maximal) for p=2^n might be desirable. Eliminating multiplication and modulus operations would result in the fastest PRNG possible as the only operations would be bitshift and addition.